| TECHNICAL SPECIFICATION |
|---|
| Model ID |
|---|
| Manufacturer (Make) | Benelli |
| Model Name | BX 505 Enduro |
| Year | 2010 |
| Category(class) | Enduro |
| Engine |
|---|
| Engine Capacity (Displacement) | 505 ccm (30.82 cubic inches) |
| Engine Type | Single cylinder, four-stroke |
| Bore x Stroke | Ø104.0 mm x 59.5 mm (Ø4.09 inches x 2.34 inches) |
| Bore/Stroke Ratio | 1.75 |
| Compression Ratio | 11.5:1 |
| Valves per Cylinder | 4 |
| Timing System | DOHC |
| Fuel System(Carburetion) | Injection. Electronic injection - throttle body 42 mm EURO 3 |
| Ignition | Digital |
| Starter System | Electric & kick |
| Lubrication System | Wet sump and reeds |
| Exhaust System | With catalytic converter and oxygen sensor |
| Powertrain |
|---|
| Clutch | Wet clutch 7 steel discs |
| Gearbox | 6 speed |
| Transmission (Final Drive) | Chain |
| Chassis/Suspension/Brakes |
|---|
| Frame Type | Single tube cradle with forged, casted and extruded elements and carbon structural part s. |
| Front Suspension | 50 mm fully adjustable |
| Rear Suspension | Sachs shock absorber fully adjustable |
| Front Brakes | Single disc |
| Front Brakes Diameter | Ø260 mm (Ø10.24 inches) |
| Rear Brakes | Single disc |
| Rear Brakes Diameter | Ø220 mm (Ø8.66 inches) |
| Front Tire | 80/100-21 |
| Rear Tire | 140/80-18 |
| Dimensions |
|---|
| Overall Length | 2160 mm (85.04 inches) |
| Overall Width | 810 mm (31.89 inches) |
| Seat Height | 960 mm (37.8 inches) |
| Fork Angle (Rake) | 26.5° degrees |
| Trail | 110 mm (4.33 inches) |
| Wheelbase | 1450 mm (57.09 inches) |
| Dry Weight | 110.0 kg (243 lb) |
| Fuel Capacity | 9.00 litres (2.38 gallons) |
| Performance |
|---|
| Max Power | 59.67 HP (43.6 kW) at 8500 RPM |
| Max Torque | 50.00 Nm (36.76 ft*lbs) at 5750 RPM |
| Power/Weight Ratio | 0.48 Hp/Kg |
| Top Speed | - |
| Acceleration (dart, speedup) time | |
| 0-100 km/h | 3.8 seconds |
| 0-60 mph | 3.6 seconds |
| 1/4 mile | - |
| 60 to 140 km/h, highest gear | - |
