TECHNICAL SPECIFICATION |
---|
Model ID |
---|
Manufacturer (Make) | Buell |
Model Name | Ulysses XB12X |
Year | 2008 |
Category(class) | Enduro |
Engine |
---|
Engine Capacity (Displacement) | 1202 ccm (73.35 cubic inches) |
Engine Type | V2 |
Compression Ratio | 10.0:1 |
Stroke | 4 |
Valves per Cylinder | 2 |
Timing System | OHV |
Fuel System(Carburetion) | Injection. 49 mm down draft DDFI III fuel injection |
Starter System | Electric |
Cooling System | Oil & air |
Exhaust System | Tuned, tri-pass resonance chamber with InterActive valve and mass-centralized mounting |
Powertrain |
---|
Clutch | Wet, multi-plate, compensated |
Gearbox | 5 speed |
Transmission (Final Drive) | Belt |
Chassis/Suspension/Brakes |
---|
Frame Type | Aluminum frame with Uniplanar™ powertrain vibration isolation system, fuel in frame |
Front Suspension | 47 mm Showa inverted forks with rearward offset axle, adjustable compression damping, rebound damping and spring preload |
Front Suspension Travel | 165 mm (6.5 inches) |
Rear Suspension | Showa coil-over monoshock with adjustable compression damping, rebound damping and spring preload |
Rear Suspension Travel | 162 mm (6.38 inches) |
Front Brakes | Single disc |
Front Brakes Diameter | Ø375 mm (Ø14.76 inches) |
Rear Brakes | Single disc |
Rear Brakes Diameter | Ø240 mm (Ø9.45 inches) |
Front Tire | 120/70-ZR17 |
Rear Tire | 180/55-ZR17 |
Dimensions |
---|
Overall Length | 2159 mm (85 inches) |
Fork Angle (Rake) | 23.5° degrees |
Wheelbase | 1374 mm (54.09 inches) |
Ground Clearance | 171 mm (6.73 inches) |
Dry Weight | 192.8 kg (425 lb) |
Fuel Capacity | 16.65 litres (4.4 gallons) |
Performance |
---|
Max Power | 103.00 HP (75.2 kW) at 6800 RPM |
Max Torque | 113.90 Nm (83.75 ft*lbs) at 6000 RPM |
Power/Weight Ratio | 0.48 Hp/Kg |
Top Speed | - |
Acceleration (dart, speedup) time | |
0-100 km/h | 3.8 seconds |
0-60 mph | 3.6 seconds |
1/4 mile | - |
60 to 140 km/h, highest gear | - |