TECHNICAL SPECIFICATION |
---|
Model ID |
---|
Manufacturer (Make) | Derbi |
Model Name | Senda DRD 125 4T 4V R |
Year | 2010 |
Category(class) | Enduro |
Engine |
---|
Engine Capacity (Displacement) | 124 ccm (7.57 cubic inches) |
Engine Type | Single cylinder, four-stroke |
Bore x Stroke | Ø58.0 mm x 47.0 mm (Ø2.28 inches x 1.85 inches) |
Bore/Stroke Ratio | 1.23 |
Compression Ratio | 12.0:1 |
Valves per Cylinder | 4 |
Fuel System(Carburetion) | Carburettor. 30 mm |
Ignition | CDI |
Starter System | Electric |
Lubrication System | Dry sump |
Cooling System | Liquid |
Exhaust System | Euro 3 |
Powertrain |
---|
Clutch | Multi-plate in oil bath |
Gearbox | 6 speed |
Transmission (Final Drive) | Chain |
Chassis/Suspension/Brakes |
---|
Frame Type | Double steel beam |
Front Suspension | Upside down fork |
Front Suspension Travel | 245 mm (9.65 inches) |
Rear Suspension | Progressive linkage monoshock with separate gas tank |
Rear Suspension Travel | 230 mm (9.06 inches) |
Front Brakes | Single disc. Wave |
Front Brakes Diameter | Ø260 mm (Ø10.24 inches) |
Rear Brakes | Single disc. Wave |
Rear Brakes Diameter | Ø220 mm (Ø8.66 inches) |
Front Tire | 90/90-21 |
Rear Tire | 120/80-18 |
Dimensions |
---|
Overall Length | 2188 mm (86.14 inches) |
Overall Width | 808 mm (31.81 inches) |
Seat Height | 905 mm (35.63 inches) |
Wheelbase | 1443 mm (56.81 inches) |
Dry Weight | 120.0 kg (265 lb) |
Curb Weight | 124.0 kg (273 lb) |
Fuel Capacity | 7.50 litres (1.98 gallons) |
Performance |
---|
Max Power | 15.00 HP (10.9 kW) at 9250 RPM |
Power/Weight Ratio | 0.12 Hp/Kg |
Top Speed | - |
Acceleration (dart, speedup) time | |
0-100 km/h | 13 seconds |
0-60 mph | 12.3 seconds |
1/4 mile | - |
60 to 140 km/h, highest gear | - |