| TECHNICAL SPECIFICATION |
|---|
| Model ID |
|---|
| Manufacturer (Make) | Moto Guzzi |
| Model Name | V7 Classic |
| Year | 2010 |
| Category(class) | Classic |
| Engine |
|---|
| Engine Capacity (Displacement) | 744 ccm (45.4 cubic inches) |
| Engine Type | V2, four-stroke |
| Bore x Stroke | Ø80.0 mm x 74.0 mm (Ø3.15 inches x 2.91 inches) |
| Bore/Stroke Ratio | 1.08 |
| Compression Ratio | 9.6:1 |
| Valves per Cylinder | 2 |
| Timing System | OHC |
| Fuel System(Carburetion) | Injection. Weber-Marelli |
| Starter System | Electric |
| Lubrication System | By lobes with pressure pump |
| Cooling System | Air |
| Exhaust System | 3 ways catalyzed with sonda Lambda |
| Powertrain |
|---|
| Gearbox | 5 speed |
| Transmission (Final Drive) | Shaft drive (cardan) |
| Chassis/Suspension/Brakes |
|---|
| Frame Type | Detachable tubular duplex cradle in special high-strengh steel |
| Front Suspension | Marzocchi hydraulic telescopic fork |
| Front Suspension Travel | 130 mm (5.12 inches) |
| Rear Suspension | Swinging arm in light cast alloy with two dampers, preload adjustable |
| Rear Suspension Travel | 118 mm (4.65 inches) |
| Front Brakes | Single disc. Bremo |
| Front Brakes Diameter | Ø320 mm (Ø12.6 inches) |
| Rear Brakes | Single disc. Bremo |
| Rear Brakes Diameter | Ø260 mm (Ø10.24 inches) |
| Front Tire | 110/70-17 |
| Rear Tire | 130/80-17 |
| Dimensions |
|---|
| Overall Length | 2185 mm (86.02 inches) |
| Overall Width | 800 mm (31.5 inches) |
| Seat Height | 805 mm (31.69 inches) |
| Fork Angle (Rake) | 27.5° degrees |
| Trail | 109 mm (4.29 inches) |
| Dry Weight | 182.0 kg (401 lb) |
| Curb Weight | 198.0 kg (437 lb) |
| Fuel Capacity | 17.00 litres (4.49 gallons) |
| Performance |
|---|
| Top Speed | - |
| Acceleration (dart, speedup) time | |
| 0-100 km/h | - |
| 0-60 mph | - |
| 1/4 mile | - |
| 60 to 140 km/h, highest gear | - |
