TECHNICAL SPECIFICATION |
---|
Model ID |
---|
Manufacturer (Make) | TM racing |
Model Name | EN 250 |
Year | 2010 |
Category(class) | Enduro |
Engine |
---|
Engine Capacity (Displacement) | 249 ccm (15.19 cubic inches) |
Engine Type | Single cylinder, two-stroke |
Bore x Stroke | Ø66.4 mm x 72.0 mm (Ø2.61 inches x 2.83 inches) |
Bore/Stroke Ratio | 0.92 |
Compression Ratio | 16.7:1 |
Fuel System(Carburetion) | Carburettor. Keihin PWK 38 |
Ignition | Kokusan CDI Electronic with variable advance with two selectable maps through handlebar switch |
Cooling System | Liquid |
Powertrain |
---|
Clutch | Wet, multiplate |
Gearbox | 5 speed |
Transmission (Final Drive) | Chain |
Chassis/Suspension/Brakes |
---|
Frame Type | Perimetral aluminium section |
Front Suspension | Marzocchi USD 50mm |
Rear Suspension | Sachs Boge (optional Ohlins ) |
Front Brakes | Single disc. Nissin pump and Brembo caliper |
Front Brakes Diameter | Ø270 mm (Ø10.63 inches) |
Rear Brakes | Single disc. Nissin pump and Brembo caliper |
Rear Brakes Diameter | Ø245 mm (Ø9.65 inches) |
Front Tire | 100/90-21 |
Rear Tire | 140/80-18 |
Dimensions |
---|
Fuel Capacity | 8.70 litres (2.3 gallons) |
Performance |
---|
Top Speed | - |
Acceleration (dart, speedup) time | |
0-100 km/h | - |
0-60 mph | - |
1/4 mile | - |
60 to 140 km/h, highest gear | - |