TECHNICAL SPECIFICATION |
---|
Model ID |
---|
Manufacturer (Make) | Triumph |
Model Name | Daytona 675 |
Year | 2011 |
Category(class) | Sport |
Engine |
---|
Engine Capacity (Displacement) | 675 ccm (41.19 cubic inches) |
Engine Type | In-line three, four-stroke |
Bore x Stroke | Ø74.0 mm x 52.3 mm (Ø2.91 inches x 2.06 inches) |
Bore/Stroke Ratio | 1.41 |
Compression Ratio | 12.7:1 |
Valves per Cylinder | 4 |
Timing System | DOHC |
Fuel System(Carburetion) | Injection. Multipoint sequential electronic fuel injection with forced air induction and SAI |
Ignition | Digital-inductive type via engine management system |
Starter System | Electric |
Cooling System | Liquid |
Powertrain |
---|
Clutch | Wet. multi-plate |
Gearbox | 6 speed |
Transmission (Final Drive) | Chain |
Chassis/Suspension/Brakes |
---|
Frame Type | Aluminum beam twin spar |
Front Suspension | Kayaba 41mm upside down forks with adjustable preload. rebound and high/low speed compression damping. 110mm wheel travel |
Rear Suspension | Kayaba monoshock with piggy back reservoir adjustable for preload. rebound and high/low speed compression damping. 130mm rear wheel travel |
Front Brakes | Double disc |
Front Brakes Diameter | Ø308 mm (Ø12.13 inches) |
Rear Brakes | Single disc |
Rear Brakes Diameter | Ø220 mm (Ø8.66 inches) |
Front Tire | 120/70-ZR17 |
Rear Tire | 180/55-ZR17 |
Dimensions |
---|
Overall Length | 2019 mm (79.49 inches) |
Overall Width | 709 mm (27.91 inches) |
Overall Height | 1105 mm (43.5 inches) |
Seat Height | 831 mm (32.72 inches) |
Fork Angle (Rake) | 23.9° degrees |
Wheelbase | 1394 mm (54.88 inches) |
Curb Weight | 184.6 kg (407 lb) |
Fuel Capacity | 17.41 litres (4.6 gallons) |
Performance |
---|
Max Power | 124.00 HP (90.5 kW) at 12600 RPM |
Max Torque | 71.87 Nm (52.85 ft*lbs) at 11700 RPM |
Power/Weight Ratio | 0.67 Hp/Kg |
Top Speed | - |
Acceleration (dart, speedup) time | |
0-100 km/h | 3.2 seconds |
0-60 mph | 3.1 seconds |
1/4 mile | - |
60 to 140 km/h, highest gear | - |