| TECHNICAL SPECIFICATION |
|---|
| Model ID |
|---|
| Manufacturer (Make) | Victory |
| Model Name | Hammer 8 Ball |
| Year | 2010 |
| Category(class) | Cruiser / Chopper / Custom |
| Engine |
|---|
| Engine Capacity (Displacement) | 1638 ccm (99.96 cubic inches) |
| Engine Type | V2, four-stroke |
| Bore x Stroke | Ø101.0 mm x 102.0 mm (Ø3.98 inches x 4.02 inches) |
| Bore/Stroke Ratio | 0.99 |
| Compression Ratio | 8.7:1 |
| Valves per Cylinder | 4 |
| Timing System | SOHC |
| Fuel System(Carburetion) | Injection. Electronic Fuel Injection with dual 45mm throttle body |
| Cooling System | Air |
| Exhaust System | Staggered slash-cut dual exhaust with crossover |
| Powertrain |
|---|
| Clutch | Wet, multi-plate |
| Gearbox | 5 speed |
| Transmission (Final Drive) | Belt |
| Chassis/Suspension/Brakes |
|---|
| Front Suspension | Inverted cartridge telescopic fork, 43 mm diameter |
| Front Suspension Travel | 130 mm (5.12 inches) |
| Rear Suspension | Single, mono-tube gas, cast aluminum with rising rate linkage, preload adjustable spring |
| Rear Suspension Travel | 76 mm (2.99 inches) |
| Front Brakes | Single disc. 4-piston caliper |
| Front Brakes Diameter | Ø300 mm (Ø11.81 inches) |
| Rear Brakes | Single disc. 2-piston caliper |
| Rear Brakes Diameter | Ø300 mm (Ø11.81 inches) |
| Front Tire | 130/70-R18 |
| Rear Tire | 250/40-R18 |
| Dimensions |
|---|
| Overall Length | 2365 mm (93.11 inches) |
| Seat Height | 660 mm (25.98 inches) |
| Fork Angle (Rake) | 32.7° degrees |
| Trail | 140 mm (5.51 inches) |
| Wheelbase | 1669 mm (65.71 inches) |
| Ground Clearance | 135 mm (5.31 inches) |
| Dry Weight | 304.8 kg (672 lb) |
| Fuel Capacity | 17.03 litres (4.5 gallons) |
| Performance |
|---|
| Max Power | 97.00 HP (70.8 kW) |
| Power/Weight Ratio | 0.28 Hp/Kg |
| Top Speed | - |
| Acceleration (dart, speedup) time | |
| 0-100 km/h | 5.3 seconds |
| 0-60 mph | 5.1 seconds |
| 1/4 mile | - |
| 60 to 140 km/h, highest gear | - |
