| TECHNICAL SPECIFICATION |
|---|
| Model ID |
|---|
| Manufacturer (Make) | Victory |
| Model Name | Hammer S |
| Year | 2010 |
| Category(class) | Cruiser / Chopper / Custom |
| Engine |
|---|
| Engine Capacity (Displacement) | 1731 ccm (105.63 cubic inches) |
| Engine Type | V2, four-stroke |
| Bore x Stroke | Ø101.0 mm x 108.0 mm (Ø3.98 inches x 4.25 inches) |
| Bore/Stroke Ratio | 0.94 |
| Compression Ratio | 9.4:1 |
| Valves per Cylinder | 4 |
| Timing System | SOHC |
| Cooling System | Oil & air |
| Exhaust System | Staggered slash-cut dual exhaust with crossover |
| Powertrain |
|---|
| Gearbox | 6 speed |
| Transmission (Final Drive) | Belt |
| Chassis/Suspension/Brakes |
|---|
| Front Suspension | Inverted cartridge telescopic fork, 43mm diameter, 5.1in/130mm travel |
| Rear Suspension | Single, mono-tube gas,cast aluminum with rising rate linkage , 3.9in/100mm travel, preload adjustable spring |
| Front Brakes | Double disc. 4-piston calipers |
| Front Brakes Diameter | Ø300 mm (Ø11.81 inches) |
| Rear Brakes | Single disc. 2-piston calipers |
| Rear Brakes Diameter | Ø300 mm (Ø11.81 inches) |
| Front Tire | 130/70-R18 |
| Rear Tire | 250/40-R18 |
| Dimensions |
|---|
| Overall Length | 2366 mm (93.15 inches) |
| Seat Height | 673 mm (26.5 inches) |
| Fork Angle (Rake) | 32.7° degrees |
| Trail | 140 mm (5.51 inches) |
| Ground Clearance | 148 mm (5.83 inches) |
| Dry Weight | 303.0 kg (668 lb) |
| Fuel Capacity | 17.03 litres (4.5 gallons) |
| Performance |
|---|
| Max Power | 97.00 HP (70.8 kW) |
| Power/Weight Ratio | 0.29 Hp/Kg |
| Top Speed | - |
| Acceleration (dart, speedup) time | |
| 0-100 km/h | 5.3 seconds |
| 0-60 mph | 5 seconds |
| 1/4 mile | - |
| 60 to 140 km/h, highest gear | - |
